|
| Place of Origin: | China |
| Brand Name: | Sansion |
| Certification: | CE/CNAS/ISO9001 |
| Model Number: | SXCY |
IEC 60060 is an important reference for high-voltage testing techniques. Selecting a suitable impulse voltage test system requires more than checking its maximum rated voltage. The waveform parameters, measuring system performance, uncertainty, test object and applicable standard edition must also be considered.
Our configurable lightning impulse voltage test solutions can be reviewed against the customer's specified standards and test procedures. The technical proposal should identify the applicable standard edition, supported waveforms, rated voltage, energy rating, measurement components and available test documentation.
High-voltage laboratories, transformer manufacturers, independent test institutes, electrical equipment exporters and engineering teams responsible for compliance testing.
No. The exact requirements depend on the relevant part, edition, test procedure, measuring system and application. Compliance must be assessed against the specified requirements.
It identifies the nominal front time and time to half-value of a standard lightning impulse voltage waveform, subject to the applicable standard definitions and tolerances.
The required margin and configuration should be established through engineering design, considering the test object, circuit losses and operating conditions.
Request a detailed datasheet, waveform capability list, measurement-system specifications, applicable standard references, calibration documentation and factory acceptance test plan.
Send your target standard, waveform and rated test voltage for a specification review.
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski
