High-voltage insulation systems may experience different types of transient overvoltage during operation. Lightning-related overvoltages and switching-related overvoltages have different waveform characteristics and testing requirements.
A High Voltage Impulse Generator can be configured to generate different impulse waveforms for evaluating the dielectric performance of electrical equipment. The system may support standard lightning impulse voltage, chopped lightning impulse voltage, and switching impulse voltage generation, depending on the selected generator and wave-shaping configuration.
This flexibility makes it suitable for laboratories that need to perform several types of high-voltage impulse tests.
Different impulse waveforms require different wave-shaping conditions. The required waveform must be determined according to the relevant test standard and test object.
| Impulse Type | Typical Waveform | Notes |
|---|---|---|
| Lightning impulse | 1.2/50 μs | Standard lightning transient simulation |
| Switching impulse | 250/2500 μs | Standard switching transient simulation |
| Chopped lightning impulse | Interrupted waveform | Waveform interruption at a specified point |
Lightning impulses simulate lightning-related transient overvoltages, while switching impulses represent transient overvoltages associated with switching operations.
Yes, if the system has been designed with the appropriate wave-shaping circuits and operating configuration.
A commonly used standard switching impulse waveform is 250/2500 μs.
No. The requirement depends on the equipment voltage class, insulation design, and applicable testing standard.
Consider maximum impulse voltage, energy, capacitance, waveform adjustment range, measurement capability, and the compatibility of each test configuration.