Product Name: 10kVA/150kV Power Frequency PD-Free AC Withstand Test System
Before electrical equipment is accepted or put into service, insulation performance must be verified against the required AC withstand level. The 10kVA/150kV Power Frequency PD-Free AC Withstand Test System provides a dedicated high-voltage testing solution for acceptance, commissioning and insulation verification procedures.
The equipment is centered around a 150kV PD-Free Test Transformer and supported by a Motorized Operation Console, Power Supply and Voltage Divider. During a test, the operator can progressively apply the required power-frequency AC voltage and monitor the corresponding high-voltage level. The PD-free configuration is especially useful when minimizing test-source discharge is an important part of the testing environment.
| Parameter | Specification |
|---|---|
| Capacity | 10 kVA |
| AC Test Voltage | 150 kV |
| Test Category | Power Frequency AC Withstand |
| Transformer | PD-Free Test Transformer |
| Operation System | Motorized Console |
| Measurement System | Voltage Divider |
| Primary Function | Dielectric Withstand Verification |
Q1: Can the system be used for acceptance testing?
A: Yes. It can be used for applicable power-frequency AC withstand tests during equipment acceptance and commissioning.
Q2: What type of transformer is included?
A: The system uses a PD-Free Test Transformer specifically configured for the testing system.
Q3: What is the system capacity?
A: The rated capacity is 10kVA, with a maximum AC test voltage of 150kV.
Q4: What equipment can be tested?
A: Suitable transformers and other electrical equipment requiring power-frequency AC dielectric withstand testing can be tested according to their applicable test requirements.
![]()