Welcome to Sansion Power Electric Co., Ltd.!

Circuit Breaker Tester

Current position:Home > Product > HV Switchgear Test Set > Circuit Breaker Tester >

Circuit Breaker Tester SXGK-F

Manual

Report

Video tutorial

Unclear?Click change!

sansionpower@hotmail.com

SXGK-F is designed to test the dynamic characteristics various voltage degree vacuum, SF6, with oil and etc high voltage and low voltage circuit breakers.

  • ♦ Auto identify open or close status. To give correspondent close or open prompt according to channel’s status.

  • ♦ Can detect and prompt connection status of 6 channels (12 channels for option), it’s convenient to detect connection.

  • ♦ 100 groups data storage.

  • ♦ Large LCD, can read clearly even in direct sunlight.

  • ♦ Friendly English interface, easy to operate.

  • ♦ Graphical analysis function, to realize waveform and measuring processed data to displayed at same screen.

  • ♦ Delay protection, auto switch off coil voltage after breaker acting, to protect breaker and HV tester.;

  • ♦ Open-closed test by auto or manual is selectable.

  • ♦ High/low voltage test is all available.

  • ♦ Time test: 6 channels (12 channels for option)

  •     Open(Close)time

  •     Open(Close)one phase no- synchronism

  •     Open(Close)phase to phase no-synchronism

  •     Close(Open)bounce time(bounce numbers)

  •     Test range: 0.1ms~999.99ms

  •     Accuracy: 0.5%±(1% read+2digits)

  • ♦ Velocity test: Open(Close)velocity

  •    Pointed periods of time(travel period or angle period)average speed

  •    Open(Close)max.velocity.

  •    Range: 1mm Sensor: 0.01~25.00m/s

  •                   0.1mm sensor: 0.001~2.50m/s

  •                   0.5°angle sensor: 1cycle/ 0.5°

  •     Accuracy: 1mm Sensor  ±(1% reading+1digit)

  •                         0.1mm sensor ±(2% reading +1digit)

  •                         0.5°angle sensor ±(1% reading+1digit)

  • ♦ Travel test: Active contactor travel

  •                         Contactor travel (open distance)

  •                         Overshoot travel or bounce travel (amplitude)

  •                         Sensor: 50mm,Resolution:0.1mm

  •                         Sensor: 300mm(option),Resolution:1mm

  •                         360line sensor: 360о, resolution:0.5о, accuracy: ±1%

  • ♦ 320×240LCD

  • ♦ 100 groups test data storage.

  • ♦ Build-in thermal printer

  • ♦ AC source: AC 220V ± 10%;50Hz ± 2%

  • ♦ DC source: Output voltage:30~245Vcontinous adjustment,output current:≤ 15A(short time)

  • ♦ Control unit oversize: 380×280×140mm

  • ♦ Working temperature: -10℃~+50℃

  • ♦ Relative humidity: ≤90%